GSD7666-DG1 Single-phase DIN-rail Prepayment Energy Meter
GSD7666-DG1 is an advanced & compact DIN-rail energy meter with split-type structure & Class 1 accuracy. Complying with STS standard, the meter is suitable for commercial & residential cus
Details
GSD7666-DG1 is an advanced & compact DIN-rail energy meter with split-type structure & Class 1 accuracy. Complying with STS standard, the meter is suitable for commercial & residential customers and has outstanding tamper detection features. It could make communication with the external Customer Interface Unit(CIU) by M-bus, PLC or RF, and its installation requirements are also optional.
Main Features
| ·Multi-tariff ·DLMS/COSEM compliant ·STS prepayment ·20-digit STS encryption ·35mm DIN-rail installation ·Tamper detection & recording |
·MCU linking to CIU by M-bus/PLC/RF(optional) ·Slim-line & space-saving design ·Disconnecting on overload & no-credit condition ·Programmable warning of power limit & low credit ·With infrared port/RS485/virtual token carrier (optional) ·Surge protection against lightening & other line surges |
Split-type Structure for Anti-tampering Protection
The meter consists of two parts, the MCU (Metering & Control Unit) and CIU (Customer Interface Unit),which could be linked via communication modes of M-bus, PLC or RF based on requirements.
The CIU is installed inside the customer’s home for inputting prepayment token and searching for information, while the MCU is normally installed in a meter enclosure away from the customer’s home.
The CIU is installed inside the customer’s home for inputting prepayment token and searching for information, while the MCU is normally installed in a meter enclosure away from the customer’s home.
ELECTRICAL PARAMETERS
|
VOLTAGE
|
|
| Nominal voltage Un | 230V |
| Limited voltage |
70% ~ 120%Un
|
|
FREQUENCY
|
|
|
Nominal frequency fn
|
50 ~ 60Hz
|
|
Tolerance
|
±5%
|
|
CURRENT
|
|
|
Basic current(Ib)
|
5A
|
|
Maximum current(Imax)
|
60A/80A
|
|
Starting current(Ist)
|
20mA
|
|
Active energy constant
|
1000imp/kWh
|
|
MEASUREMENTACCURACY
|
|
|
Active energy as IEC62053-21
|
Class 1.0
|
|
POWERCONSUMPTION
|
|
|
Voltage circuit
|
<2W<8VA
|
|
Current circuit
|
<1VA
|
|
TEMPERATURE RANGE
|
|
|
Operation range
|
-25℃ ~ +70℃
|
|
Storage range
|
-40℃ ~ +85℃
|
INSULATION
|
Insulation level
|
4kV rms 1min
|
|
Impulse withstand voltage
|
8kV 1.2/50 μs
|
|
Insulation system classification
|
Protection class II
|
ELECTRO MAGNETIC COMPATIBILITY
|
ELECTROSTATIC DISCHARGES
|
|
|
Contact discharge
|
8kV
|
|
Air discharge
|
15kV
|
|
ELECTROMAGNETIC RF FIELDS
|
|
|
27MHz to 500MHz typical
|
10V/m
|
|
100kHz to 1GHz typical
|
30V/m
|
|
Fast transient burst test
|
4kV
|
|
MECHANICAL REQUIREMENTS
|
|
|
Meter case protection class
|
IP54
|
|
Insulation system classification
|
Protection class II
|
|
Maximum cable size
|
8 mm
|
